Introduction and Features of RHONG Hard Plastic Crushers

Hard plastic crusher, this machine is suitable for crushing all kinds of small and medium plastic plates:

1, ABS, PE, PP and other boards are crushed and recycled;

2. The rectangular feeding port is uniquely designed for the crushing of the board material, which is convenient for the crushing of the long-shaped board and the work efficiency. Optional suction fan and storage bucket to form sheet crushing and recycling can give full play to the recycling efficiency;

3. Sealed bearings are used to keep the bearing rotating well for a long time; the design of the knife shape is reasonable, and the product is uniformly granulated; the tool holder is heat-shrinked, and the appearance design is beautiful;

Features of this machine:

1. The hopper and the receiving box are made of stainless steel to ensure clean materials

2. The grinding chamber is polished and ground, and the thick steel plate is welded and processed as a whole, excellent;

3. The tool post is processed by wire cutting to ensure accuracy. It is matched with the central axis and assembled cleanly

4. The bottom bracket and the tool holder are formed by oil matching, without any solder joints, no hidden materials, which is good for cleaning, and avoids the deformation of the bottom bracket due to welding

5. The blade cutter adopts a scissor structure, with good progressive cutting effect and low noise

6. type adopts symmetrical stepped arrangement to disperse impact load, so that small power can crush large-size products

7. Imported alloy inlaid steel material is used to ensure quality

8. The compact structure design makes this model small, flexible and convenient for immediate recycling

Optional Equipment:

1. For fiber-containing materials, the crushing chamber and other parts of the raw materials are all surface treated

2. Immediate recovery device, which can immediately recover the crushed materials through the fan, during which the materials are separated from the dust by the cyclone separator.

3. Two-material proportional valve, which can realize proportional recovery of new and crushed materials

4. The screen, the screen with special aperture can be customized

5. Heightened hopper can be used for crushing longer materials

6. Full material device, when the receiving box is full, the machine will stop and send out an alarm with a warning light or buzzer. Application range: This series of models are often used next to injection molding machines to produce nozzle materials when plastics are filled And waste materials are immediately put into the machine for crushing, and a fan or suction machine can be installed to realize the immediate recycling and reuse of crushed materials; it is also used for low-output crushing needs.

7. General-purpose plastic crusher adopts sealed bearings to keep the bearing rotating well for a long time;

8. The design of the knife shape is reasonable, the alloy sheet is used, the product is uniformly granulated, the knife holder is heat-shrinked, and it is strictly balanced, and the appearance design is beautiful and generous;